Our Services
Our Roofing Services
Professional Roofing solutions for residential and commercial properties in Bryant.
Roof Replacement
We don't do shortcuts on replacements. Tear off the old roof, check the decking for soft spots, install synthetic underlayment, drip edge, starter strip, shingles, ridge vent. The whole system. Your roof is only as good as the layers underneath.
Roof Repair
Step flashing at chimney walls is the number one leak source we see in Bryant. Improper step flashing causes roof leaks. It's that simple. We install new step flashing with a chimney cricket for proper water diversion, sealed with Geocel tripolymer sealant. Fix it once, fix it right.
Storm Damage Repair
Our storm damage process: free inspection, full photo documentation, direct filing with your insurance carrier, meet the adjuster on-site, and handle the repairs once approved. We don't ask for money upfront on insurance claims.
New Roof Installation
We price new installs by the roofing square (100 sq ft). Architectural shingles in Bryant typically run $350-$550 per square installed, depending on the pitch and access. That includes materials, labor, cleanup, and warranty registration.
Metal Roofing
Metal roofing in Iowa makes sense. It reflects heat, handles high winds, and sheds hail better than shingles. We install standing seam, corrugated, and metal shingle panels.
Shingle Roofing
We install asphalt shingles from every major manufacturer. GAF, Owens Corning, CertainTeed, Atlas, Tamko, Malarkey, IKO. Each has different warranty tiers and price points. We walk you through the comparison without pushing one brand.
Flat Roofing
TPO single-ply membrane in 60-mil or 80-mil thickness, hot-air welded seams, fully adhered or mechanically attached over polyiso insulation board. We install per NRCA and manufacturer specifications. Ponding water is the number one cause of flat roof failure. We use tapered ISO insulation to create minimum 1/4" per foot slope to drains. FM 4473 rated systems available for hail-prone Bryant areas.
Commercial Roofing
We install Carlisle SynTec TPO and EPDM membrane systems with full Carlisle manufacturer warranties. Our Bryant commercial roofing crews are factory-trained and authorized. TPO seams are hot-air welded at 900+ degrees. The weld is stronger than the membrane itself. Ponding water? We install tapered ISO insulation to create positive drainage per NRCA guidelines.
Gutter Installation
Half-round copper gutters with round downspouts. That's the premium install. We solder joints on-site using 50/50 tin-lead solder. Copper develops a natural patina in Iowa's climate within 5-7 years. For aluminum, we use Spectra Metals .027 gauge seamless with Raytec hidden hangers rated to hold 25 lbs per linear foot of ice and debris load.
Roof Inspection
Our 27-point roof inspection covers: shingle condition, granule loss, nail pops, lifting tabs, ridge cap integrity, valley flashing, step flashing at walls, drip edge, pipe boot seals, vent function, soffit ventilation, gutter pitch, downspout capacity, fascia condition, decking (from attic if accessible), and visible signs of moisture in the attic. Written report with photos emailed same day.
Emergency Roof Repair
Fallen tree limb damage requires structural assessment before repair. We check rafter integrity, decking condition, and whether the ceiling joists below were impacted. If structural members are cracked or displaced, you need a framing carpenter before we re-roof. We coordinate with trusted Bryant contractors for structural work. Insurance carriers require separate line items for structural vs. roofing repairs. We document both.
Skylight Installation
Skylight installation costs $1,200-$3,500 in Bryant depending on size, type, and roof pitch. That includes the unit, flashing kit, interior trim, and roof patch-in. We handle everything from the outside in.